How to Turn ON Skullcandy Wireless Earbuds

Skullcandy’s wireless earbuds come in different models. However, almost all of them have the same control setup. Skullcandy’s wireless earbuds can be turned on both manually and by their own self.

The general way to turn on your Skullcandy earbuds is to press and hold the power button for about a second.

How to Turn ON Skullcandy Wireless Earbuds

This guide will also tell you how to turn on different models of Skullcandy wireless earbuds. So, let’s start with the most common way to do this.

Skullcandy Wireless Earbuds can be turned on by following these steps.

This is the first way to do it: You can set it up to

Most of Skullcandy’s wireless earbuds come in a smart case that is easy to use. When you need to store your earbuds and charge them, this case comes in handy.

As soon as you take them out of the case, your earbuds can start to work. This method works with all Skullcandy wireless earbuds, no matter which one you have.

In order to get out the earbuds, you need to open the case lid and take them out. They will turn on by themselves and a blue light will show that the earbuds are on. Earbuds will turn off when you put them back in the charging case.

Remove one of the earbuds from the charging case if you only want to use one. Keep the other one in the charging case. In the same way, you can turn off one earbud by putting it back in its case.

Putting your earbuds in their case when you aren’t using them is a good way to protect them from damage. Because it doesn’t use up extra battery power and you can use them for a longer time.

It’s the second way Manual.

Automatically, your Skullcandy earbuds can be turned on and off. You can also turn them on and off yourself. There is a touch screen on the back of most of the Skullcandy wireless earbuds that can be used.

You can tell it apart because it has the Skullcandy logo on it. This touch panel is used to do a lot of different things. However, some Skullcandy earbuds have a button on the back that works in the same way as the one on the front.

Make sure you touch and hold the panel for 4 seconds to turn on your Skullcandy wireless earbuds. Make sure the other earbud is set up the same way. Release it when the LED light turns blue.

If you want to turn off your earbuds, hold the panel for 6 seconds or until the LED is no longer lit up, then let go of the panel. For Skullcandy Push wireless earbuds, this method is good to use.

It has a manual button or touch panel on the back of each Skullcandy wireless earbud. It has the Skullcandy name on it.

People can touch control Skullcandy Jib earbuds on their back, but Dime has a button. There is, however, a way to turn both of them on.

If you follow these steps, you can turn on your Skullcandy earbuds.

Press and hold the button or touch panel on each earbud for two seconds. Then let go. The LED light will flash blue to let you know what’s going on.

For 4 seconds, hold the button down.

If you hold the button down for 4 seconds while the earbuds are turned on, they will start to connect to each other. Red and blue lights will only be on the left earbud when the LED is turned on.

The last words

So, there are two ways to turn on your Skullcandy earbuds. They have an automatic feature that turns them on and off. People who do things by hand have a button or panel.

Hopefully, this article has answered your question about how to turn on Skullcandy wireless earbuds. Let us know if you have any questions or want to give us your ideas.