How To Reset Kenwood Car Stereo 2022

When you read this, you will learn how to reset the Kenwood car stereo on your own. You can buy a Kenwood stereo in a lot of different types and models.

Each one comes with its own buttons and system, so you can use them the way you want. Kenwood is one of the most popular stereos out there. However, it can go wrong from time to time. As a result, you’ll need to set your stereo back up.

How To Reset Kenwood Car Stereo 2022
How To Reset Kenwood Car Stereo 2022

In the first place, try the soft reset method first. Then, try the hard reset. This guide will show you how to do both things, and it works with all Kenwood stereos.

Why would you want to change your Kenwood car stereo?

If your Kenwood stereo doesn’t work right, you should reset it to get it to work again. After a long time of use, the stereo starts to break down.

For example, some of the buttons don’t work or the screen doesn’t work. I think there might be a problem with the settings.

So, if you find out that your stereo has a problem, you should restart it. The reset will bring your device back to how it was when it was new. Thus, its performance will be better.

How to Change the Code on a Kenwood Car Stereo

There are a lot of ways to reset your Kenwood car stereo. In order to make things easier, we will tell you all of the ways that you can do this.

The first method is:

This reset method is only for KDC Line models of the car stereo. It works for these models. Make sure you do all of the steps right.

Start your car, then press the “Home” button to turn on the stereo. The LED light should show that your stereo is turned on.

It’s on your stereo. Find it and click it. This will remove the faceplate that is on the bottom of the stereo, so it can be cleaned. Keep in mind that you should remove the plate carefully and gently to avoid any damage to it.

There will be a reset button on the screen now. This button is too small. To press the button, you’ll need a pen or some other tool with a point.

Then, put the pen on the reset button and hold it there for about five seconds.

Allow your Kenwood car stereo to completely reset itself so that it can start over again from scratch.

One way to do this is to “soft reset.”

It’s different if your Kenwood stereo has a touch screen.

If you have this kind of stereo, you can do both a soft and a hard reset. It should be done first. The way to do it is like this:

The soft reset process is the same as the one we talked about before.

The small triangular reset button can be found. Most of the time, it’s on the top left corner of your stereo.

Lights up when the stereo is on. So, you can easily find it.

Then, with a pen or other pointed tool, press and hold the reset button for five seconds.

Your device will be wiped clean. After you set it up, you can change it.

This is the third way to do it: Factory reset.

The factory reset or hard reset process deletes all of the data on your stereo, so you have to start over from scratch. So, it adapts to the factory settings, removing any software bugs that might be there.

However, the factory reset method is a little complicated. You need someone to help you do it right. If you do this right, you’ll be done.

Find the CD player on your stereo. An “Eject” button is next to it.

Press both the “Eject CD” and “Volume” buttons at the same time to get rid of the CD.

Next, use a pointed tool to press and hold the reset button for a long time. You need to hold all of these buttons at the same time, but not at the same time.

When your Kenwood stereo starts up, let go of the buttons.

Now, look for the “Initialize All” button on your car stereo and press it to start everything. It can be seen on the screen. Turn on this button, and it will start over from the beginning.

Once your stereo has started up, look for the “Initialize All” button and click on it to start it up again. You can find it on the touchscreen of your screen. Tap it to start the process.

Once the process is done, you can reset your Kenwood car stereo for the second time. Press and hold the small reset button for about five seconds, then let go and let it go.

The last words

This guide tells you how to reset your Kenwood car stereo. It works with all models of the car stereo. It doesn’t matter if you have a different brand of car stereo. You can still try the same process.

Most stereos have the same set up and system. There is a good chance that you will find our article useful because it told you how to reset the Kenwood car stereo. Keep following us to see more.