How to Pair Skullcandy Jib Wireless Earbuds

Skullcandy Jib Earbuds are wireless, so you can connect them to any Bluetooth device and listen to music. Then again, you might be a new user and not know how to pair your phone.

This article is meant to help you connect your Bluetooth earbuds to different devices. It will show you how.

Before we go any further, let’s have a quick look at Skullcandy Jib earbuds. In this case, these earbuds are very comfortable and stylish. They come in different sizes.

How to Pair Skullcandy Jib Wireless Earbuds

Another thing: They can be charged and last for up to 22 hours. People who buy them will get a one or two year warranty. They are rated IPX4.

These earbuds can be used both to listen to music and to make and answer phone calls. Because they have a wireless Bluetooth range of 30 feet, they can talk to each other.

A pair of wireless earbuds from Skullcandy called Jib can be used together.

People who use Bluetooth can find your earbuds by turning on the “pair” mode on them.

One of the best things about Skullcandy Jib wireless earbuds is that they can be used on their own.

Because you can connect only one earbud to your Bluetooth device or both earbuds at the same time, this means that you can do both things at the same time.

Put one earbud back in its case, and it won’t be able to hear any sounds. But, you won’t be able to use the buttons on it to do things.

If you want to connect your Jib earbuds to a Bluetooth device, follow the steps in this text.

Points to think about before pairing

There are some things you should think about when you start the pairing process. By following these rules, you can avoid any problems or mistakes when you pair.

  • The Skullcandy Jib Earbuds must be fully charged before you can connect them to your phone or tablet.
  • Turn your earbuds back on so they can connect easily.
  • Keep them very close to the device you want to connect to, so that you can connect them.
  • During the first five minutes after turning on your Bluetooth pairing mode, you should be able to connect them.
  • These earbuds can only connect to one thing at a time. Once they are together, they stay together. So, before you can connect your earbuds to a new device, you need to reset them again, right?

Step 1: Your Skullcandy Jib Wireless Earbuds need to be set up again before you can use them.

They will start working when you take them out of the case.

It’s time to turn off your earbuds. To do this, press and hold the power button for 4-5 seconds.

There is a power button on both of the earbuds to turn them on. There are two earphones, so you should also do this with the other one.

Now, press and hold the button on both of the earbuds for 10 seconds, then let go of it. Putting them back in their case will do this.

Step 2: It’s time to connect your Skullcandy Jib Wireless Earbuds to each other.

After a while, the LED lights on both earbuds will start to flash red at the same time. Take them out of their case now.

The LED on both Jib earbuds will flash blue to show that they are turned on.

Now, both earbuds will be in sync with each other. A beep or tone lets you know that you’ve successfully synced.

Step 3: Connect Your Skullcandy Jib Wireless Earbuds to a Bluetooth Device. This is how you connect them.

Go to Settings on the device that you want to connect your Skullcandy Jib earbuds to. This could be an Android phone, an iPhone, a Windows PC, or a Mac.

When you open the Bluetooth menu, make sure that Bluetooth is turned on!

Check for “available devices” and your Jib headphones will show up in the list. You can also add a new Bluetooth device or show Bluetooth devices.

Tap its name and press the “Connect” button to connect your earbuds to it.

After you pair your Jib earbuds, they will make a sound to let you know.

To figure out how to connect Skullcandy Jib wireless earbuds to different things, read on.

It is possible to connect Skullcandy Jib Wireless Earbuds to a lot of different Bluetooth devices. The process of setting them up to be able to connect to each other is the same (mentioned in this article).

However, the process of connecting to different devices is different. On an iPhone, iPad, Android phone, or tablet, you can find the Bluetooth menu by going to “Settings>Bluetooth.”

The search box or the Bluetooth icon on the screen can help you find it on Windows 10 and Mac OS, but you can also get to it by clicking on it.

On Windows 10, you can get to the Bluetooth menu by going to “Settings>Devices>Bluetooth and other devices.” At the top of the screen, click “Apple menu>System Preferences.” Then click “Bluetooth.”

You now know how to connect Skullcandy Jib Wireless Earbuds to different Bluetooth devices after reading this guide, right? Do not be afraid to ask us anything.