3 Ways To Make a TV Antenna Amplifier In 2022

Do you want to improve the signal strength and range of your TV? In this class, we will show you how to make a TV antenna amplifier. If your antenna’s range is small, the TV signals become weak.

So, the TV channels can’t be seen very well. To help you make your own TV antenna amplifier, we’ve written a DIY guide. It shows you how to do it with simple things.

This antenna can be used both outside and inside. If you want to make this antenna amplifier, you don’t need to be an expert.

3 Ways To Make a TV Antenna Amplifier In 2022
3 Ways To Make a TV Antenna Amplifier In 2022

The best thing about this amplifier is that it improves your TV signals without you having to spend money on a more powerful signal booster. So, follow our step-by-step guide. That’s what we did.

Method 1: Making a Cardboard Box

This is a simple way to make a TV antenna amplifier that is easy to make. You need a lot of thick cardboard, scissors or cutters, and aluminium foil to make this project. The following is how it works:

Pencil the middle of the cardboard to make a big circle.

In the next step, draw two small semicircular projections on each side of the cardboard. In this case, they should be smaller than the central circle. They should be placed above or below the circle’s middle point.

Another piece of cardboard should have a rectangular shape drawn on it, so take another piece of cardboard. It should be a little longer and a little less wide than the circle.

You should make these cuts taking into account the size of your TV antenna.

Wrap aluminium foil around both cardboards, on both sides of each one, to make them more durable. Cover all of the edges. Fold the long piece of cardboard around the circle.

Fold the cardboard in half. Fit the rectangle of cardboard into the circle of cardboard.

Use the holes you made on the circle of cardboard. When you put the two cardboards together, it will look like a semicircle at that point.

Fold the outside edges of the circle into a lip shape. It should cover the whole length of the cardboard. This is how it should look.

In the middle of the circle, cut a small hole so your antenna can go through it. Then, connect the amplifier to the antenna.

Find the best place to put the pair so that you can get the most signals.

This is the second way to do it.

If you don’t have time to make your own TV antenna amplifier, there is another way. You need some things that are found in every home. The following is how it works:

Take a wire hanger and use pliers to make it completely straight. Rubber gloves should be worn to avoid getting hurt.

Now, take a ferrite magnet and tightly coil the straightened wire hanger around its concave part. Do this until the wire is all the way around the magnet.

Let about 6 inches of hanger wire come out of both ends of the magnet.

It’s time to wrap electrical tape tightly around this thing. Cover both the magnet and coil with the tap at all times Wrap the tape a lot to make it thick.

You need to cut up pieces of wire insulation sleeving to do this job. Cover three out of six inches of the wire that comes out of both ends of the magnet.

Wrap electrical tape around the sleeve to keep it in place. There should also be 3 inches of tape on the wire that comes out of the wall.

This is it. Your TV antenna amplifier is now ready to use. Place it above your TV and see how the signals get better.

Simplest Method: Method 3 doesn’t build anything.

This is an easy way to make a TV antenna amplifier without having to build anything. Just a metal bucket and a bath towel will do. Take these steps in the right order.

Towel: Place a clean, dry towel near your TV. When you’re done, take a small metal bucket and put it face-down on a towel.

In this case, put your digital TV antenna on top of the bucket, as shown.

Play a lot of different channels on your TV, especially the ones that have weak signals. As time goes on, you will see a huge difference in how clear the pictures are

If not, move the antenna to a different spot on the bucket or move the bucket itself.

You have to work a little to find the exact spot where the antenna is on the bucket. Antenna: Adjust it so that you can hear better.

The last words

We hope that you will find our guide very helpful! How to make an antenna amplifier is very simple. We told you about 3 ways that you can make one yourself.

A method that doesn’t need to be built is also there. If you want to improve your TV antenna’s reception, this is the easiest and fastest way to do it. However, it does take some work to get it right the first time.

If you want to make a TV antenna amplifier at home, there are two other ways you can do it. Remember to tell us which method you liked best.