How To Reset Power Bank of Any Brand In 2022

A power bank is a great idea because it lets you charge your phone anywhere and at any time. This guide will show you how to reset a power bank. It will show you how to do this.

When the power bank is having trouble charging, you usually need to reset it. People say things like the power bank isn’t getting charged or isn’t charging the phone.

It also drains quickly or freezes up. These problems can be solved by resetting your device if the problem isn’t with your device itself.

But, sometimes, the battery dies or the hardware is broken. People might need to fix or even buy a new power bank if this is the case.

There are many different kinds of power banks on the market. In terms of power banks, Samsung and Anker are two of the most well-known brands.

How To Reset Power Bank of Any Brand In 2022
How To Reset Power Bank of Any Brand In 2022

The same goes for brands like Xiao Mi and Romoss and Cygnett and RavPower and Imuto and Belkin.

There are two basic ways to reset these power banks, and they can be used with any of them. If one doesn’t work, you can try the second one.

The first step:

You can only use this method to reset Samsung and Xiao Mi power banks with this method.

You can press and hold the “Power” button on the charging bank to turn it on.

For the Mi power bank, hold the button down for 15 seconds, then let go of it.

For the Samsung power bank, hold the button down for 7.5 seconds, then let go of it.

The power bank will start again. After that, drain its battery to the point where it’s dead, and then charge it up again.

You’ll need 12-13 hours to fully charge Xiao Mi, and it will take a lot of time. While Samsung’s power bank takes almost four hours to fully charge, this one only takes about an hour.

This is also shown by the LED lights that stay on when the device is done charging.

Follow the same steps with other power banks. Hold down the power button until the device restarts and then runs out of battery power, then let go of it.

The second method:

For all power banks, this method will work. But for the Anker power bank, this method works best.

Take the USB cable that came with your power bank.

When you put one end into the USB port on your power bank, plug the other end into a charging port, and loop the cable around.

Leave the cable almost plugged in for about 10 seconds, but don’t pull it out yet.

You can now restart your power bank and check how well it works.

There are some important maintenance tips that you should keep in mind

Because a power bank is an electronic device, it can have problems that last for a short amount of time.

Many things can affect the health of your device, including weather changes, electric shock, water, heat, and even the cable that you use to charge your phone or tablet.

So, here are some very important things you should do to keep your power bank healthy and safe.

Always use the USB cable that came with your power bank to charge your phone or tablet. Do not buy third-party or cheap cables.

Because if you charge your device with a cable that isn’t compatible, it won’t charge all the way.

The power bank is being charged. Do not charge your phone from it.

You should charge your phone when the power bank is full and the power source is gone.

Protect your device from direct heat and sunlight by putting it in a case or case. Keep it away from a source of heat or electricity.

Use your power bank to charge the devices that you should. Charging a device that isn’t compatible will damage the battery.

Keep your charging bank tidy and clean. This will help it work better. Keep its ports clean with a clean cloth and a new toothbrush.

If you only use the device a few times a year, don’t forget to charge it every three months.

A lot of people put a lot of books or other things on their power bank to make it last longer.

Keep an eye on the lights on your device while it is plugged into the power source. Always make sure your device isn’t too or too low on battery power.

It’s best not to use the battery all the way up. Lithium-ion batteries have a built-in safety mechanism. So, they can get hurt because they don’t have enough power.

Another thing that will happen is that your device will not last as long, and it will be hard to charge a fully drained battery.

It’s also a good idea not to use your phone while it’s charging through the power bank. Why? Because it can damage both of them.

Frequently Asked Question: FAQs

No, a power bank can’t be blown up. Why?

There is a risk that a power bank will explode if its power cells aren’t good enough. If you overcharge it, the cell gets very hot and explodes, so don’t do it.

It doesn’t matter what kind of power bank you have if you overcharge it, even if it’s good.

When a power bank explodes, it can not only damage the device or phone, but the person who is using it can also be hurt by the blast.

In general, how long is the life of a power bank?

It is thought that a power bank lasts about 3-4 hours. It can also stay charged for about three to six months.

Even so, if you follow the advice in this article, you can keep your power bank going for a long time.

How many times can I use my power bank?

Using the power bank all the time will shorten its charging cycles. If you only use it a few times a week, you can get more charging cycles.

Most strong power banks can charge up to 1,000 times. This means that while a normal and small power bank can last 200-300 cycles, this one is much bigger and can last much longer.

Power banks can damage your phone?

As a rule, the power bank doesn’t hurt your phone. However, if you overcharge your phone, it will most likely break it.

Even if you don’t use your phone while it’s charging, it can still damage your device. When you don’t have electricity, use the power bank.

Under normal circumstances, you can charge your phone by plugging it into a power outlet.

Charge a brand new power bank before I use it?

Most manufacturers suggest that you charge your device before you use it for the first time. There are different types of power banks based on how much battery power they have and how big they are.

So, the time it takes to charge varies, so it’s best to follow the instructions in the manual. There is a general rule that a new power bank takes about an hour or two to fully charge.

The last words

We’ve answered most of the questions you’ll want to know about in this guide. However, if you want to ask us about anything else, don’t be afraid to do so.

Here are some more important things you should do to keep your device healthy: You must follow them in the correct way.

The two ways we have shown you to reset your power bank have been shown to you. You can try both with your own device because they are the same for all of them.