Connect Studio Monitors to Computer [Without Audio Interface]

If you want to connect studio monitors to a computer, there are a lot of ways. In your studio monitors, you have to figure out which type of connection they have.

It’s important to know that each method has its own benefits and drawbacks. Because the type of connection cable has an effect on how the audio is sent.

Connect Studio Monitors to Computer [Without Audio Interface]
Connect Studio Monitors to Computer [Without Audio Interface]

To help you connect your monitors to a computer, we will tell you how. This guide is for PCs, laptops, Macs, and other types of computers.

The first method is:

In order to connect your studio monitors to your computer, you need a dual RCA or 1/8″ cable. This is a quick way that is both cheap and easy.

Turn on your computer and plug one end of the RCA cable into it. Plug the other end into your studio monitors, too.

On the back of the basic studio monitors, there are two RCA plugs for connecting them. If you do this right, you’ll be done.

Connect the red and black ends of a 14″ RCA cable to your TV set.

Plug its headphone jack into the headphone port on your computer, and your computer will be able to hear it.

Right now, connect the red wire to the right studio monitor speaker, and connect the black wire to the left studio monitor speaker, In this case, pull them apart.

Choose a cable that is long enough to make it easy to connect. It’s not the best way because it can make the sound a little off.

If you want high-quality and smooth audio, spend a little money on audio cables that are made for that.

The second method:

This works with the cheap studio monitors that only have RCA inputs. To connect, they need a 1/8″ to RCA adapter.

An adapter is plugged into your computer’s headphone jack. It takes the stereo output and turns it into RCA. The way to do it is like this:

Plug the 1/8″ stereo jack into the headphone port on your computer and you’re ready to listen to music.

Then, connect the two ends of the RCA to your studio monitors, as shown in the picture.

Make sure you connect the red part with the right speaker and the black one with the left one of them.

The last words

Basically, you can connect your studio monitors to the computer by plugging in a 3.5mm headphone jack.

But, the sound and transmission aren’t very good with this type of connection. Use an audio interface to make sure you have a good connection.

This guide has told you how to connect your studio monitors to a computer. There are two ways to do this. If you need a quick answer, you can use these methods.